MC-6382 Mini Breath Alcohol Tester

(1) Green Light
(2) Yellow Light
(3) Red light
(4) Clock LCD
(5) Power Button
(6) Breath Inhaler
(7) MODE button
(8) HR button
(9) MIN button
(10) Battery Compartment
(11) AG13 button cell cover
(12) Battery Insulator
(13) Reset button

Features

1. 3-step alcohol test step with LED indicator.
2. Quick response and resume.
3. Real time and alarm time.
4. Countdown timer.
5. Alcohol tester uses 2 “AAA” alkaline batteries
6. Clock uses 1- AG13 button cell.

Battery Installation

1. Note: Remove the battery insulator to activate the clock (1.5V - AG13 button cell supplied).

2. To open the battery compartment on the back of the unit, slide the lid downwards.

3. Insert two “AAA” (or UM-4) size alkaline batteries with correct polarity as indicated.

4. Replace the battery compartment cover.

How To Use The Alcohol Tester

Warmup

1. Press and hold the power button to turn on the alcohol tester. The yellow and red LED lights will light up to show that it is warming up.

2. Press and hold the power button until the green LED lights up indicating that the unit is ready to use.

3. You must continue holding the power button until you’ve finished the entire test.

Note:

· The warm-up time is about 0-15 seconds depending on the sensor’s status or on the environment.

· When first removing the unit from the packaging or if the alcohol tester hasn’t been used for quite some time it may have gas or other impurities on the alcohol sensor which will result in it taking longer to warm-up. If this is the case try pressing the power button several times.

Testing alcohol concentration

1. After the warm-up has been completed, wait 3-5 seconds, and then place the unit near your mouth and blow into the holes on top of the unit for 3-5 seconds.

2. Look at the front of the unit for the test result.

A. If only the green LED is lit – Safety – the alcohol concentration is under 0.02% BAC (0.1mg/1 BRAC)

B. If only the yellow LED is lit – Caution – the alcohol concentration is 0.02% to 0.05% BAC (0.1mg/1 to 0.25/1 BRAC)

C. If both the yellow LED and the red LED are lit – Danger – the alcohol concentration is over 0.05% BAC (0.25mg/1 BRAC)

3. Release the power button when the test is finished.

4. To obtain more accurate results repeat the test 2 or 3 times.

How to use the clock

Real time

1. In real time mode, press <HR> button to select 12 or 24 Hour format.

2. Press and hold <MODE> button for 2 seconds to enter real time setting, the hour and minute digits will blink on the clock LCD.

3. Press <HR> or <MIN> button to adjust the hour or minute.

4. Press <MODE> button to confirm.

Alarm time

1. In real time mode, press <MODE> button 1-5 times to enter alarm mode for alarms 1 to 5.

2. Press <MIN> button to select whether you want the alarm on or off.

3. Press and hold <MODE> button for 2 seconds to enter timer setting, the hour and minute digits will blink on the clock LCD.

4. Press <HR> or <MIN> button to adjust the hour or minute.

5. Press <MODE> button to confirm.

Count down timer

1. In real time mode, press <MODE> button 6 times to enter timer mode.

2. Press and hold <MODE> button for 2 seconds to enter timer setting, the hour and minute digits will blink on the clock LCD.

3. Press <HR> or <MIN> button to adjust the hour or minute.

4. Press <MODE> button to confirm.

5. When the timer counts down to 00.00 the alarm will sound and then it will reload the timer value.

Reset the clock

If you want to return all settings to the factory values, please use a blunt stylus to press the reset button once.

Replace Battery

1. Replace the two “AAA” batteries when the alcohol tester will no longer turn on and warm-up.

2. Replace the AG13 button cell when the clock LCD is faint. You must remove the cover screw to replace the button cell.

Hanging feature

Attach the hand strap (included) to the plastic pole on the right hand side of the unit.

Specifications

* Sensor: advanced semiconductor oxide alcohol sensor

* Range: 0.00%-0.10 BAC (0.00-0.50mg/1BRAC)

* Test accuracy: 0.01 BAC (0.05 mg/1BRAC)

* Power input: 2 x 1.5V “AAA” alkaline batteries (for alcohol tester) & 1 x 1.5V AG13 button cell (for clock)

* Operating time: warm-up: 15-30 seconds, response <5 seconds

* Clock accuracy: +/- 2.0 seconds per day

* Dimensions: 91 x 31 x 17.5 mm

Precautions

· For most accurate results it is recommended that you wait 20 minutes after your last drink to take the test. This is because it takes approximately 20 minutes for the alcohol to be absorbed into the blood from the digestive organs and for the residual alcohol remaining in the mouth to dissipate.

· For accurate results, do not repeat the next test within 3 minutes after the previous test.

· Do not smoke or eat for 20 minutes prior to testing.

· Do not use chemicals to clean the tester.

· Do not blow liquid into the tester.

· Do not place the tester in a closed environment with contaminated air.

· The BAC results of the tester are for reference only, and the manufacturer assumes no legal responsibility for the results thereof.